Residential · Lakeland, FL
Flake epoxy flooring is a high-build, slip-resistant system that upgrades plain concrete into a durable, easy-to-clean surface for garages, shops, and commercial back-of-house areas. Elite Epoxy Lakeland installs and repairs full-flake and partial-broadcast floors using proper concrete prep, moisture checks, and UV-stable clear coats, serving Lakeland since 2019.
A long-lasting flake epoxy floor starts with concrete prep, not the flakes. We diamond-grind to open the slab and remove paint, curing compounds, tire residue, and weak laitance, then repair cracks, pitting, and spalls with fast-set epoxy mortar or polyurea crack filler. Before coating, we test for moisture vapor emissions and check for contamination that can cause fisheyes or delamination. Next comes the base coat (typically 100 percent solids epoxy or a fast-cure polyaspartic base when downtime matters), applied at a controlled mil thickness for full coverage and strong bond.
Central Florida humidity and hot tires can punish coatings, so we build the system to match the space and traffic. After broadcasting vinyl color flakes to refusal for a full-flake look (or a lighter broadcast for budget and texture control), we scrape and vacuum the excess for a flat, even profile. The finish coat is selected for performance, usually a UV-stable polyaspartic or polyurethane clear coat to resist yellowing, abrasion, and chemical spills. We can dial in traction with aluminum oxide or polymer grit for wet entries, wash areas, and commercial walkways while keeping the floor easy to mop.
Lakeland customers choose us because the process is transparent and the install is done by a contractor who understands coating failures and how to prevent them. We are licensed and insured, provide a written scope, and document the prep method, coating type, and cure window so you know exactly what is going on your slab. Crews show up with industrial grinders, HEPA vacs, mixing drills, calibrated squeegees, and spike shoes so the coating goes down clean and consistent. When we repair existing flake epoxy flooring, we look for root causes like moisture, poor prep, thin topcoats, or incompatible materials, then patch, recoat, or rebuild the system the right way.
At the end of the job we walk you through the floor, the broadcast level, and the clear coat sheen, and we verify edges, control joints, and transitions. You get care instructions that match the chemistry, including cure times before foot traffic, rolling toolboxes, and parking vehicles, plus cleaning guidance (pH-neutral cleaner, soft bristle, no citrus solvents). For repairs, we explain what was fixed, what was re-coated, and how to avoid repeat damage from dragging metal, battery acid, or harsh degreasers. Schedule a site visit and we will measure, test the slab, and provide a free written estimate for your flake epoxy flooring installation or repair.
Yes. We provide a free written estimate that outlines prep, coating layers, finish, and expected downtime.
Sometimes. We evaluate the existing coating, test adhesion, and typically grind to a sound layer or remove failed material. If the old coating is peeling or soft, it needs removal and proper profiling.
Common options include solid color epoxy, full or partial flake broadcast, quartz systems, and metallic epoxy for decorative interiors. Topcoats can be polyaspartic or polyurethane, with optional traction additives.
Glossy finishes can be slick with water or oils. We can add aluminum oxide or polymer grit, adjust texture, and recommend the right finish for garages, pool decks, and commercial areas.
Typical causes include moisture vapor pressure, contaminated concrete (oil, silicone, curing compounds), insufficient surface profile, or coating outside the recoat window. Proper testing, grinding, and product selection prevent most failures.
Flake epoxy flooring is one of the most popular concrete coating systems for garages, commercial work areas, and retail back rooms because it combines a decorative look with real performance. Elite Epoxy Lakeland installs new flake floors and repairs failed coatings by focusing on the variables that matter most: concrete profile, moisture conditions, coating chemistry, broadcast rate, and the right clear coat for UV and abrasion resistance. If your current floor is peeling, bubbling, or wearing thin in traffic lanes, we can evaluate whether a recoat is possible or if the slab needs a full removal and rebuild.
A proper flake epoxy flooring system is built in layers. After grinding and repairs, we apply a high-build base coat and broadcast vinyl flakes, then scrape and vacuum to remove loose material and level the surface. The top coat is where many floors fail, so we use a wear layer designed for the environment, often polyaspartic or polyurethane for better abrasion resistance and faster return to service than standard epoxies. For commercial spaces, we can add extra clear coats or traction media where code-level slip resistance is needed.
For flake epoxy flooring repair, we start by identifying the failure mode. Peeling often traces back to poor prep or moisture vapor pressure, while yellowing points to non-UV-stable clears, and bald spots usually come from thin topcoats or aggressive cleaning chemicals. Depending on the condition, we may spot-repair chips, recoat worn areas, or grind and replace the system so the new coating bonds to sound concrete. You will get a written scope, product plan, and realistic cure timeline so you can plan around parking, business hours, or shop operations.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Lakeland. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
